Kraus KWD211-75MCG, WasteGuard 3/4 HP Garbage Disposal Review

The model number gives it away before the spec sheet does. Where the rest of Kraus’s WasteGuard lineup uses a “KWD201” prefix, the 3/4 HP Kraus KWD211-75MCG bumps to “KWD211”, and the technical details confirm it’s a genuinely different build underneath, not just a bigger motor bolted onto the same housing.

Amazon’s own listing lists the construction material as ABS and Stainless Steel together, rather than stainless steel alone like the smaller KWD201-33MCG and KWD201-50MCG. That’s the same MagnaGrind motor philosophy and QuietStorm soundproofing carried up from the rest of the line, built into a larger 34 ounce chamber sized for a household that runs its disposal hard.

This review covers what actually changes at 3/4 HP, how the KWD211-75MCG compares to the smaller WasteGuard models already covered on this site, and whether the step up is worth it for your kitchen.

Kraus KWD211-75MCG, WasteGuard 3/4 HP Garbage Disposal Specifications

Specification	Details
Brand	Kraus
Manufacturer	Kraus USA Plumbing, LLC
Model Number	KWD211-75MCG
Horsepower (HP)	3/4 HP
Motor Type	3800 RPM MagnaGrind Permanent-Magnet Motor
Feed Type	Continuous Feed
Grinding Chamber Capacity	34 oz
Grinding Components	ABS and Stainless Steel
Mount Type	Universal 3-Bolt Mounting
Voltage	120V
Product Dimensions	8.13 × 10.38 × 15.5 inches
Item Weight	11.9 lbs
Color / Finish	Matte Cool Grey
Included Components	Drain and dishwasher connectors, optional power cord, splash guard, mounting flange with stainless steel rim, drain stopper with extended tailpiece
Septic Safe	Yes (per manufacturer guidelines)
Warranty	5-Year Warranty for personal household use (per Kraus’s official installation manual)

Kraus KWD211-75MCG, WasteGuard 3/4 HP Garbage Disposal Key Features

3800 RPM MagnaGrind Motor with a 34 oz Chamber

The KWD211-75MCG runs the same 3800 RPM permanent-magnet MagnaGrind motor as the rest of Kraus’s WasteGuard lineup, scaled up to 3/4 HP with a 34 ounce grinding chamber, four ounces larger than the 1/2 HP KWD201-50MCG and seven ounces past the 1/3 HP KWD201-33MCG. At this horsepower, the disposal is built for a household that runs waste through the sink regularly rather than occasionally, without needing to slow down and feed material in small batches.

The instant-torque nature of a permanent-magnet motor matters even more at this size. A bigger chamber moving more waste per cycle benefits from full torque the moment the switch flips, rather than gradually ramping up the way an induction motor does.

QuietStorm Soundproofing and Anti-Vibration Mounting

The same QuietStorm soundproofing and anti-vibration mounting system found across the WasteGuard line carries up to the 3/4 HP tier. Noise control tends to matter more, not less, as horsepower goes up, since a bigger motor moving more waste generates more vibration to begin with. Kraus builds this model with that specifically in mind rather than treating quiet operation as a feature exclusive to the smaller units.

ABS and Stainless Steel Construction

Here’s a genuine build difference worth flagging. Amazon’s technical specifications list the KWD211-75MCG’s material as ABS and Stainless Steel combined, rather than the stainless-steel-only listing shown for the smaller KWD201-33MCG and KWD201-50MCG. In practice, this likely reflects the same design approach used across the line, an ABS housing paired with stainless-steel grinding components, but it’s listed explicitly as a combined material here, and it’s worth confirming directly with Kraus if the exact composition of the grinding chamber itself matters to your buying decision.

Universal 3-Bolt Mounting, Plug-In or Hardwire Ready

Installation runs through the same universal 3-bolt mount used across residential disposals generally, making the KWD211-75MCG a straightforward replacement for an existing 3-bolt unit. Kraus’s installation manual documents both a plug-in setup with the included power cord and a hardwire connection option, covering either electrical configuration.

Automatic Shut-Off Jam Protection

An automatic shut-off cuts power the instant the motor detects a jam, protecting the internals rather than letting a stuck object keep fighting a running motor. The reset button sits on the underside of the unit, opposite the discharge elbow, per Kraus’s installation documentation, so recovering from a trip doesn’t require a service call.

Installation and What’s Included

The box includes drain and dishwasher connectors, an optional power cord, a splash guard, a mounting flange with a stainless steel rim, and a drain stopper with an extended tailpiece, the same standard installation kit found across the WasteGuard lineup. At 11.9 lbs and just over 15 inches tall, this is a noticeably larger, heavier unit than the 1/2 HP KWD201-50MCG, worth double-checking against your cabinet clearance before you buy rather than after the box arrives.

Maintenance

The motor is permanently lubricated and self-cleaning through normal use, so avoid oiling it. Kraus’s manual is explicit that damage from lye or chemical drain cleaners voids the warranty, and it also notes that hard water mineral deposits can leave a rust-like appearance on the stainless steel turntable that isn’t actual corrosion. Run cold water while grinding rather than hot, keeping grease and fats solid enough to flush through the line cleanly.

Daily Use Experience

At 4.5 stars across 12 ratings, early ownership feedback on the KWD211-75MCG is solid, if slightly more mixed than the near-perfect scores on the smaller KWD201-50MCG. For a household that regularly grinds through fibrous scraps, larger bones, or a full sink of dishes after a big meal, the 3/4 HP motor and 34 ounce chamber should handle that volume with noticeably less strain than a 1/2 HP unit working at its limit.

Kraus’s manual notes the same detail that applies across the WasteGuard line, the Anti-Jam Swivel Impellers make a clicking sound as they swing into place, and that’s documented as normal operation rather than a fault.

Warranty

Kraus backs the KWD211-75MCG with a 5-year warranty for personal household use, per the manufacturer’s official installation manual, the same term applied across the WasteGuard lineup regardless of horsepower tier. Coverage runs from the date of purchase through an authorized Kraus dealer, applies only within the United States and Canada, and is non-transferable. The warranty excludes damage from hard water deposits, chemical drain cleaners, and improperly sealed sink flange or dishwasher connections, so following the documented care steps is what keeps that 5-year coverage valid.

Kraus KWD211-75MCG, WasteGuard 3/4 HP Garbage Disposal Pros and Cons

Kraus KWD211-75MCG vs the 1/2 HP KWD201-50MCG

Feature	Kraus KWD211-75MCG	Kraus KWD201-50MCG
Motor Power	3/4 HP	1/2 HP
Grinding Chamber	34 oz	30 oz
Item Weight	11.9 lbs	9.92 lbs
Product Dimensions	8.13 × 10.38 × 15.5 inches	7.38 × 9.75 × 14.5 inches
Material	ABS and Stainless Steel	Stainless Steel
Warranty	5 Years	5 Years
Best For	Heavier daily use, larger households	Typical everyday household waste

Further Reading:
Kraus KWD201-50MCG 1/2 HP Garbage Disposal
Kraus KWD201-33MCG 1/3 HP Garbage Disposal
GE GFC720N 3/4 HP Garbage Disposal
InSinkErator Badger 5XP Garbage Disposal Review

Conclusion

The Kraus KWD211-75MCG takes the same MagnaGrind motor and QuietStorm soundproofing that make the smaller WasteGuard models worth considering and scales them into a chamber built for a household that puts real daily volume through its disposal. The ABS and stainless steel construction is a small but honest distinction from the smaller models worth knowing about going in.

If your kitchen handles heavier, more frequent grinding, larger bones, thicker vegetable trim, a full sink after hosting, the extra chamber capacity and motor power here are worth the added size and weight. For a lighter-use household, the 1/2 HP KWD201-50MCG covers the job without the larger footprint. Either way, the Kraus KWD211-75MCG backs its higher tier with the same straightforward 5-year warranty as the rest of the lineup.